UNiKA

Generating and outputting pink noise from XLR to active loudspeakers

Generating and outputting pink noise to the NL4 and NL8 outputs

Pink noise is equipped with its own on/off volume potentiometer.

5VDC button for impedance detection of the loudspeaker

Power by external +48V phantom power

Built-in UNiKA-PROTM EI30A10E isolation transformer

Use British OEP PT-4 1:1 audio pulse transformer in phantom power circuit

+48V status indicator on the upper cover

Power by external +48V phantom power

Built-in UNiKA-PROTM EI30A10E isolation transformer

Use British OEP PT-4 1:1 audio pulse transformer in phantom power circuit

+48V status indicator on the upper cover

One input & three output audio splitter

CH-1/CH-2 are equipped with separate UNiKA-PROTM EI9AE3R3 1.25:1 isolation transformer

Use XLR jack for input

Set the direct output of MONITOR OUT without isolation transformer

Built-in UNiKA-PROTM EI9AE3R3 1.25:1 isolation transformer for each channel

Built-in headphone amplifier with independent mini TRS jack and volume control

16bit convert rate and 44.1KHz over sampling

Compatible with Windows, Mac OS, iOS and Android systems

Two inputs, two output passive isolator.

CH-1/CH-2 are equipped with separate UNiKA-PROTM EI9AE3R3 1.25:1 isolation transformer

XLR/Jack combination sockets for inputs

Set the PHASE REVERSE button for CH-2 input

Built-in UNiKA-PROTM EI9AE3R3 1.25:1 isolation transformer for each channel

The input socket uses a pair of TRS jacks, a pair of RAC and a mini TRS.

All input jacks can be using for through out.

There is 0dB/-20dB input signal attenuation switch

Built-in UNiKA-PROTM EI9AE3R3 1.25:1 isolation transformer

The input socket uses Combo jack

Use TRS jack as through out terminal

There is 0dB/-20dB input signal attenuation switch

Built-in UNiKA-PROTM EI9AE3R3 1.25:1 isolation transformer for each channel

The input socket uses a pair of TRS jacks

Use a pair of TRS jacks as through out terminal

There is 0dB/-20dB input signal attenuation switch

Built-in UNiKA-PROTM EI9AE3R3 1.25:1 isolation transformer for each channel

Built-in CT7601 USB bridge and CS43131 DAC with headphone amplifier

32bit convert rate and 192KHz over sampling

Compatible with Windows, Mac OS, iOS and Android systems.