Video over IP
Distributing video over IP networks offers plenty of benefits when addressing both unicast and multicast transmission work scenarios. This network based set of devices are going to provide a decentralized, flexible and scalable solution that will definitely give you the upper hand in your AV projects. Include this devices in your Eclernet project for a perfect AV system control.
Ecler VEO-XTI2L
4K Low Latency Over IP Video Extender
Support Video Wall composition (Max 8x8)
4K UHD HDMI over IP/Fiber Extension
Support point-to-point, point-to-multipoint and multipoint-to-multipoint configurations
USB2.0 over IP extension for KVM
Support transmission distances up to 120m over single Cat.5e/6 cable
Support fiber optic extensions up to 60Km (Single Mode)
Support up to 4K@60Hz YUV 4:2:0 input and 4K@30Hz outputs
HDCP 2.2 / HDCP1.4 compliant
Ecler VEO-XRI2L
4K Low Latency Over IP Video Extender
Support Video Wall composition (Max 8x8)
4K UHD HDMI over IP/Fiber Extension
Support point-to-point, point-to-multipoint and multipoint-to-multipoint configurations
USB2.0 over IP extension for KVM
Support transmission distances up to 120m over single Cat.5e/6 cable
Support fiber optic extensions up to 60Km (Single Mode)
Support up to 4K@60Hz YUV 4:2:0 input and 4K@30Hz outputs
HDCP 2.2 / HDCP1.4 compliant
Ecler VEO-XRI4D
JPEG2000 4K Over IP Video Receiver with Dante
Video over IP Unicast and Multicast distribution over 1Gb managed networks.
Dante AV-A ready.
Support for JPEG2000 video codec with 1-2 frame latency.
Support for HDMI® 18Gbps 4K 60Hz 4:4:4 as specified in HDMI® 2.0b.
Transmission distance up to 100 meters over Cat 6 or higher cable.
Support for Dante and AES67 for two channel In/Out audio.
Support for Main and Sub stream for video preview.
Support for video wall compositing and management up to 9 x 9 setups.
Ecler VEO-XTI1CG2
H.265 Full HD over IP Video Extenders
HDMI 1.4 with video resolution up to 1920x1200p@60Hz 4:4:4.
Signal transmission distance up to 100m over Cat5e/6/7 cable.
Support for unicast over 1Gb unmanaged networks and multicast signal extension over 1Gb managed networks.
Support for video wall compositing up to 9 x 9 setups.
Support for audio embedding and extraction.
Support for mainstream and sub stream encoding modes.
Support for pass through and RS-232, TCP/IP, Web GUI management using VEO-XCTRLG2 controller module.
HDCP 1.4 compliant.
Ecler VEO-XTI4D
JPEG2000 4K Over IP Video Transmitter with Dante
Video over IP Unicast and Multicast distribution over 1Gb managed networks.
Dante AV-A ready.
Support for JPEG2000 video codec with 1-2 frame latency.
Support for HDMI® 18Gbps 4K 60Hz 4:4:4 as specified in HDMI® 2.0b.
Transmission distance up to 100 meters over Cat 6 or higher cable.
Support for Dante and AES67 for two channel In/Out audio.
Support for Main and Sub stream for video preview.
Support for video wall compositing and management up to 9 x 9 setups.
Ecler VEO-WPTI1CG2
Wall Plate H.265 Video Over IP Transmitter
Video over IP Unicast and Multicast distribution over 1Gb managed networks.
Support for H.264/H.265 video codec with 100ms average latency.
Support for HDMI® 10.2Gbps 1080p 60Hz 4:4:4 as specified in HDMI® 1.4.
Transmission distance up to 100 meters over Cat 5e or higher cable.
Support for Main and Sub stream for video preview.
Support for video wall compositing and management up to 9 x 9 setups (via VEO-XCTRLG2).
Support for audio formats LPCM 2.0.
Advanced EDID Management (via VEO-XCTRLG2).
Ecler VEO-XCTRL4D
JPEG2000 4K Over IP Video Controller
Designed for VEO-4D system setup, control, and management through a single WebGUI interface.
Device discovery wizard with support for Automatic, DHCP, and Manual IP address assignment modes.
Device control via RS-232, TCP/IP, and a Web GUI interface for the VEO-4D system.
Compatible with HTTPS, SSH, and SFTP security protocols.
Supports Drag & Drop operations, video wall management, and Main/Substream video preview of the VEO-4D system.
Two dedicated LAN ports for independent Control and Video networks.
Support PoE functionality.
Ecler VEO-XRI1CG2
H.265 Full HD over IP Video Extenders
HDMI 1.4 with video resolution up to 1920x1200p@60Hz 4:4:4.
Signal transmission distance up to 100m over Cat5e/6/7 cable.
Support for unicast over 1Gb unmanaged networks and multicast signal extension over 1Gb managed networks.
Support for video wall compositing up to 9 x 9 setups.
Support for audio embedding and extraction.
Support for mainstream and sub stream encoding modes.
Support for pass through and RS-232, TCP/IP, Web GUI management using VEO-XCTRLG2 controller module.
HDCP 1.4 compliant.
Ecler VEO-XCTRLG2
H.265 Full HD over IP Video Extender Controller
Easy to create project, control and manage the system.
Setup wizard to easy assign devices to a project including Auto, DHCP and Manual IP configurations.
HTTPS, SSH, SFTP security compatible.
Built-in Web GUI control interface, supporting Drag & Drop operations.
Support image preview.
Support video, audio, RS-232, control and management of the distributed system.
Two dedicated LAN ports to host independent Control and Video networks.
Support TCP and RS-232 port control and third-party central control.