Digital matrixes and processors
Ecler catalogue includes several product technology levels in order to offer installers and end users complete and efficient solutions, ranging from basic and budget-minded ones to sophisticated, ergonomic and integration-friendly ones.
Ecler DAM614
6x4 | installation audio digital mixer
DSP @ 24 bits / 48kHz
Front panel LCD display
6 front panel input control digital knobs (one per input)
4 front panel output control digital knobs (one per output)
4 front panel keys, for parameters adjustment and menus navigation
Processing:- Independent level control for each input and output- Independent mixer for each output zone- Crossover filters available for each output- Independent 10 band graphic EQ for each output- Independent and adjustable High-pass filter available for MIC/LINE inputs- 2 level priority PAGER / DUCKER function, triggered by MIC/LINE inputs- Independent Noise Gate function for MIC/LINE inputs- Independent Feedback Suppressor Function for MIC/LINE inputs- Adjustable delay time for 2 outputs
Ecler DN44BOB
4x4 | Dante™ digital audio interface
Ethernet, interface, DANTE audio and EclerNet compatible
4 MIC/LINE balanced inputs, with Phantom Power and 3 sensitivity levels, Euroblock connector
4 balanced LINE Outputs, Euroblock connector
4 GPI ports (0-10VDC)
4 GPO ports, NO / NC
Rack-mount kit included: 1UHRMKIT + PUM3- Rackmount accessories to mount 2 half- width RU devices in 1 standard width RU space or to mount 1 half- width RU device in 1 standard width RU space
Ecler HUB1408
14x8 | digital zoner | DSP | plug&play
14 inputs, 8 outputs digital zoner with integrated DSP
Easy programming and control by embedded web application, HANGAR, and standard web browser
Control from the front panel and user remote control by: eMCONTROL1 wall panels (up to 8) / eMPAGE paging consoles (up to 2) / Ecler pilot application, compatible with Android and iOS:control graphic panels set to user needs (pilot panels) / TP-NET protocol (RS-232 interface with DB9 connector)for control and integrating with third party systems
Control available, by zone (output): selection of audiosource (input), volume adjustment and MUTE, 3 band tone adjustment and general volume
Four priority levels, ducker/pager functions
Available DSP: frequency shifter, link stereo, delay, crossover filters, 8-band graphic EQ, compressor/limiter and much more
Predefined setups for a quick installation (plug and play)
MUTE port can be activated by closing the external dry contact, affecting programmed outputs to this effect
Ecler HUB1616
16x16 | digital zoner | DSP | plug&play
16 inputs, 16 outputs digital zoner with integrated DSP
Easy programming and control by embedded web application, HANGAR, and standard web browser
Control from the front panel and user remote control by: eMCONTROL1 wall panels (up to 8) / eMPAGE paging consoles (up to 2) / Ecler pilot application, compatible with Android and iOS:control graphic panels set to user needs (pilot panels) / TP-NET protocol (RS-232 interface with DB9 connector)for control and integrating with third party systems
Control available, by zone (output): selection of audio source (input), volume adjustment and MUTE, 3 band tone adjustment and general volume
Four priority levels, ducker/pager functions
Available DSP: frequency shifter, link stereo, delay, crossover filters, 8-band graphic EQ, compressor/limiter and much more
Predefined setups for a quick installation (plug and play)
MUTE port can be activated by closing the external dry contact, affecting programmed outputs to this effect
Ecler MIMO1212SG
12x12 | digital matrix | DSP
12x12 digital matrix (not expandable)
Fully programmable and controllable via EclerNet software
UCP (User Control Panels) remote control system, compatible with WPNETTOUCH and third-party devices, such as computers, tablets, smartphones, etc.
TP-NET protocol compatible, for third-party control systems integration
DSP processing: signal generator, delays, full parametric EQ filters at inputs and outputs, inputs noise gate, level, mute, phase, vu-meters, outputs compressor / limiter, paging and ducking (priority & overriding), virtual and physical paging stations management, presets save & recovery, scheduled events triggering, etc.
FREQUENCY SHIFTER function to avoid acoustic feedback, available in 4 inputs
WPNET4KV and WPNET8K compatible control panels (using specific retro-compatible Firmware).
Ecler MIMO4040CDN
40x40 | digital matrix | Dante™ | AES67
CONFERENCE firmware only (no STANDARD firmware available)
40x40 audio input / output ports available
40 input channels x 40 output channels digital audio native matrix
8 MIC / LINE analogue audio inputs
8 LINE analogue audio outputs
32 Dante ™/AES67 digital input channels
32 Dante ™/AES67 digital output channels
8 GPI ports
Ecler MIMO7272DN
72x72 | digital matrix | Dante™ | AES67
STANDARD firmware only (no CONFERENCE firmware available)
72x72 audio input / output ports available
64 input channels x 64 output channels digital audio native matrix
8 MIC / LINE analogue audio inputs
8 LINE analogue audio outputs
64 Dante ™/AES67 digital input channels
64 Dante ™/AES67 digital output channels
8 GPI ports
Ecler MIMO88
8x8 | digital matrix | DSP | expandable
Expandable to 16 inputs / 16 outputs to become a real 16 x 16 matrix
Fully programmable and controllable via EclerNet software
UCP (User Control Panels) remote control system, compatible with WPNETTOUCH and third-party devices, such as computers, tablets, smartphones, etc.
TP-NET protocol compatible, for third-party control systems integration
DSP processing: signal generator, delays, full parametric EQ filters at inputs and outputs, inputs noise gate, level, mute, phase, vu-meters, outputs compressor / limiter, ducking (priority & overriding), virtual and physical paging stations management, automatic mixer function, presets save & recovery, scheduled events triggering, etc.
FREQUENCY SHIFTER function to avoid acoustic feedback (Larssen Effect), available for each INPUT channel
WPNET4KV and WPNET8K compatible control panels (using specific retro-compatible Firmware).
Ecler MIMO88SG
8x8 | digital matrix | DSP
8x8 digital matrix (not expandable)
Fully programmable and controllable via EclerNet software
UCP (User Control Panels) remote control system, compatible with WPNETTOUCH and third-partydevices, such as computers, tablets, smartphones, etc.
TP-NET protocol compatible, for third-party control systems integration
DSP processing: signal generator, delays, full parametric EQ filters at inputs and outputs, inputs noise gate, level, mute, phase, vu-meters, outputs compressor / limiter, paging and ducking(priority & overriding), virtual and physical paging stations management, presets save &recovery, scheduled events triggering, etc.
FREQUENCY SHIFTER function to avoid acoustic feedback, available in 4 inputs
WPNET4KV and WPNET8K compatible control panels (using specific retro-compatible Firmware).