Description.
The DACS Install RJ4502/VOL will send 4 balanced audio lines down one CAT5/6 cable. We recommend screened cable but connection without is quite robust. The pin out matches the CATCORE configuration (for T568A and B wiring) so these can act as breakout for SMD stage boxes and UP55 wall plates.
In addition, this can be used for an Ecler WPaVOL/SR; all the necessary connections are clearly labelled. A single FST cable connects to a GPI port (Vcc, 0V and VOL or Source). For connecting both Vol and Source, you would use two FST, with Vcc and 0V commoned.
Key Features.
Send 4 balanced audio lines down one CAT5/6 cable.
We recommend screened cable but connection without is quite robust.
The pin out matches CATCore’s configuration (for T568A and B wiring) so these can act as breakout for SMD stage boxes and UP55 wall plates.
In addition, this can be used for an Ecler WPaVOL/SR; all the necessary connections are clearly labelled. A single FST cable connects to a GPI port (Vcc, 0V and VOL or Source). For connecting both Vol and Source, you would use two FST, with Vcc and 0V commoned.
DIN rail mountable