top of page

NEXT Audiocom AD500

Frequency Response - 20Hz - 20kHz (+0 / -0.25dB)

Number of Amplifier Channels - 4 Channels Low Impedance (LoZ) / 2 Channels High Impedance (HiZ)

Amplifier Power - Stereo 8Ω - 4 x 125W

Amplifier Power - Stereo 4Ω - 4 x 125W

Amplifier Power - 100V - 2 x 250W

Amplifier Power - 70V - 2 x 250W

Speaker Output - 4Ω - 16Ω | 70V | 100V

Zones Output - 4-Zones Output

DSP Technology - Ultimate DSP with WI-FI and Ethernet Connection

DSP Adjustable Parameters - Filters: PEQ, FIR, hi/lo-shelving, all-pass, band-pass, hi/lo-pass | Limiters: RMS Voltage, Peak Voltage | GPIO Functions | Routing

Delay Adjustment - 100ms (34.3m) per Output

Control Type - Controlled Via Webpage - Compatible with Desktop, Tablet and Mobile Phone (Wireless or Cable 1 x RJ45)

Wireless Connection System - Works as a WI-FI Access Point (WAP) or WI-FI Client

Audio Signal Inputs - 4 x Analog Unbalanced Inputs | 4 x Analog Balanced Inputs | Stereo S/PDIF

Input Connectors - 4 x RCA | 2 x 6-Pole 3.5mm Phoenix Type | 1 x RCA | 8 x GPIO

Speakers Output Connectors - 2 x 4-Pole 5mm Phoenix Type

Power Input - AC 100V - 240V 50Hz/60Hz

GPIO Functions - Standby, Mute, Volume Control, Trigger IN, Trigger OUT

Dimensions (WxHxD) - 44 x 220 x 319mm (1.7 x 8.7 x 12.6 in)

Fixation - 1U 19" Rack Mount | Wall / Desktop Mount (Necessary Accessories Not Included)

Net Weight - 2.8kg (6.2 lbs)

Shipping Weight - 3.5kg (7.7 lbs)

Key Features.


The AD500 is a 4 x 125 W Class D multi-purpose installation amplifier in 1RU half rack unit with flexible power distribution among its four output channels power sharing up to 250W per channel driving both conventional low impedance (4Ω to 16Ω) loudspeakers and high impedance (70V/100V) transformer coupled loudspeakers or any mix of the two. The on board, state-of-the-art, full matrix, DSP engine can be configured to suit a wide range of tasks, without the need for additional equipment, to drive a wide range of loudspeaker systems. Everything you need is right there. The close integration of processing and amplification allows the DSP to monitor and better adapt to amplifier behaviour, making dynamics processing far more accurate and effective than that typically achieved with separate components. The active PFC (Power Factor Correction) power supply technology enables universal AC mains operation and delivers consistent, regulated power worldwide.


bottom of page