top of page

Fulcrum DX8

Dual 8” Coaxial Loudspeaker

Key Features.

  • Operating Mode: Single-amplified w/ DSP

  • Operating Range: 72 Hz to 20 kHz

  • LF Transducers: 8.0″ ceramic magnet woofer, 2.0″ voice coil

  • HF/LF Transducers: Coaxial 1.7″ titanium diaphragm compression driver; 8.0″ woofer, 2.0″ voice coil; single neodymium magnet

  • Power Handling at Nominal Impedance: HF/LF 500 W @ 8 Ω

  • Equalised Maximum SPL (peak / continuous): 130 dB / 124 dB

90° x 60°


The DX8 coaxial loudspeaker provides the output capability of a dual 8 inch loudspeaker in an enclosure size typically associated with a single 8 inch, 2-way system. Its coaxial transducer can be rotated in 45° increments, which allows its coverage to be tailored to best suit an application’s requirements, and its dedicated low frequency transducer provides additional low frequency directivity and mid bass impact. The enclosure’s 25° rear chamfers allow it to be mounted close to walls; alternatively the enclosure may be rotated for mounting close to ceilings and under balconies. When rotated, the DX896’s low profile also makes it very useful as a high output front fill system when placed on the edge of or installed into a stage apron.

Fulcrum Acoustic’s TQ™ processing is an integral part of the DX8 design. Sound, innovative acoustical design combined with state of the art digital processing leads to exceptional clarity and precise transient response, even at very high sound pressure levels. The required digital signal processing can be provided by one of many supported platforms.

The DX8’s 90° x 60° high frequency horn is particularly effective for systems where targeted pattern control is desirable. This makes it an ideal choice for small live reinforcement systems, nightclubs, restaurants, theme parks, A/V screening rooms, and more.


bottom of page