top of page

AD500 - Four channel DSP amplifier.

The AD500 is a 4 x 125 W Class D installation amplifier in a half rack unit. Power sharing up to 250 W per channel driving both low impedance speakers, high impedance (100V) speakers or any mix of the two.

NEXT Audiocom AD500 Amplifier

Key Features.

NEXT Audiocom AD500 Amplifier
  • Integrated matrix allows four zone control

  • Analogue inputs from mic level to line level

  • S/PDIF digital input and output

  • 4 x 125w low impedance or 2 x 250w 100v line

  • Browser based remote control and setup

  • Integrated WiFi

  • No software required

  • Power sharing across channels

  • Remote volume controls

  • Programmable GPIO ports

  • 3 year warranty

The AD500 4-channel amplifier features an on board, state-of-the-art, DSP engine that can be configured to operate as a four zone matrix system, without the need for additional equipment.

The AD500 can be accessed anytime, anywhere through Wi-Fi via a built-in Wireless-Access-Point (WAP) or through ethernet for simple connection and easy configuration.  Controlling and powering any speaker system, creating a multi-zone sound system in minutes. The easy-to-use web-based interface allows remote control of all DSP functions as well as monitoring from any PC, tablet, or smartphone, regardless of operating system. No software to install, simply connect via the Ethernet port or the built-in Wi-Fi, and you're ready to go.

Software-selectable multi-mode operation with switchable Normal Low Z (2Ω to16Ω), Bridge Low Z (4Ω to 8Ω) or Bridge Hi Z (70 V/100 V) allows you to mix and match speaker types as needed. Power Sharing technology distributes dynamically the available power between each amplifier channel pair, so that it can be used where it is needed the most, maximising the efficiency.

NEXT Audiocom VR6 Volume Control

AD500.

Product Type:

Frequency Response (-6 dB)

Number of channels

Power @ 4Ω

Power @ 8Ω

Power @ 100v

Zones Output

DSP Technology

 

Control Type

Input Connectors

Output Connectors

Cooling

Special Features

 

 

Dimensions (WxHxD)

Power Input

Net Weight

Class D, 4 channel with DSP

20 Hz - 20 kHz (+0 / -0.5 dB)

4 Channels Low Impedance (LoZ) / 2 Channels High Impedance (HiZ)

4x 125 W

4x 125 W

2 x 250 W

Four Zones

Ultimate DSP with WI-FI and Ethernet Connection

Controlled Via Webpage - Compatible with Desktop, Tablet and Mobile Phone (Wireless or Cable 1 x RJ45)

4 x RCA | 2 x 6-Pole 3.5 mm Phoenix Type | 1 x RCA | 8 x GPIO

1 x RCA | 8 x GPIO | 2 x 4-Pole 5 mm Phoenix Type

Speed Controlled Fan

GPIO Functions: Standby, Mute, Volume Control, Trigger IN, Trigger OUT

44 x 220 x 319 mm

AC 100 V - 240 V 50 Hz/60 Hz

2.8kg 

NEXT Audiocom VR6 Remote Volume Control
bottom of page